GUITAR PROTECTOR SPECIFICATIONS
The model RS-4 looks like a power strip, but it is really a state of art, microprocessor based, multimode power sequencer with EMI/RFI noise filtering and power conditioning. The RS-4 conforms to UL 1449-4 for surge protection with a 15 ft. power cord and so much more. Previously, pro audio power sequencers were rack mounted and limited to large professional audio performances. Designed by musicians and roadie tested, the RS-4 is transportable and can be used anywhere—onstage, in the studio, or in the home. Use the RS-4 to protect your gear like your guitar, bass, keyboards, and P.A. The RS-4 is manufactured in Duluth, Georgia U.S.A and Includes a lifetime warranty.
Four Modes of Operation
Start with Standard Mode were you can independently adjust On/Off Delay sequence from 1-15 seconds for potentially 45 seconds total delay. Or choose from one of the three new sequence modes of operation:
Instant On
When AC power is applied to the RS-4, the unit will immediately begin the On Delay sequence. This is useful in a stage or studio environment where the RS-4 may not be the main power switch but you still want the instant on convenience of a conventional power strip while still providing the added advantages of the power sequencer.
Receptacle One Always On
In this mode, receptacle one will always be on while the On/Off Delay sequence for the three remaining receptacles can be set from 1-15 seconds and engaged with the footswitch. This mode is useful to keep any piece of gear on continously, like a computer or a light.
Timer Mode
The unit will automatically shut off power sequentially after a designated number of hours, determined by the On/Off Delay setting. This mode works well in the studio to autmoatically power down gear at the end of the day or when you forget.
Datasheet
| Power Rating | 120VAC, 60Hz, 15A 1800W |
| Safety Specifications | Conforms to ANSI/ UL Std. UL 1449-4 UL 1363 and to CAN/CSA 22.2 NO. 8 |
| Actuation Switch | Push button foot switch (on- off) |
| Dimensions | 13.25”L X 4.25”W X 1.50”H |
| Chassis Construction | Steel Welded 20 guage |
| Receptacles | (8) High impact thermoplastic (4) duplex receptacle Nema 5-15R |
| Power Rating | 120VAC, 60Hz, 15A 1800W |
| Power Cord | 15 foot 14 gauge SJT Nema 5-15p |
| Surge Suppression | (9) MOV’s 1935 Joules L-N L-G N-G Network UL1449-3 |
| Circuit Protection | 15 AMP main power circuit breaker extreme over voltages over current shutdown with automatic resettable circuit |
| EMI/EMC | Electromagnetic Interference (EMI) Filters-Fourth Edition; General Instruction No 1, 2 and 3;Issue:1982/09/01 (CSA C22.2 No. 8, with T.I.L No 516) 55022 |
| Delay Sequence | 4-step 0-15 second adjustable delay sequence between receptacles for both on delay and off delay for potentially 0 to 45 second delay |
| Diagnostic Indicators | (4) LEDS one for each duplex receptacle indicating AC power to dedicated receptacle and power to controlling relay (1)LED front panel indicates electronic control module’s switching power supply and surge suppression network is functioning properly |