The RS-4 power sequencer spreads the initial inrush current of your gear over four steps allowing you to power up more gear safely than ever before on a single 15 amp circuit. With eight outlets and a 15 foot long cord, you can use the RS-4 anywhere with all your gear such as guitar, bass, keyboards and P.A. systems.
The ROCKN STOMPN's power sequencer gives you the ability to change the time delay sequence to suit your needs. There are now four ways to harness the power of the ROCKN STOMPN sequential power strip:
Start with Standard Mode were you can independently adjust on and off delay sequence from 1-15 seconds for potentially 45 seconds total delay. Or choose from one of the three new sequence modes of operation:
When AC power is applied to the RS-4, the unit will immediately begin the On Delay Sequence. This is useful in a stage or studio environment where the RS-4 may not be the main power switch but you still want the instant on convenience of a conventional power strip but with the added advantages of the power sequencer.
In this mode, receptacle one will always be on while the On/Off Delay Sequence for the three remaining receptacles can be set from 1-15 seconds and engaged with the footswitch. This mode is useful to keep any piece of gear on continously, like a computer or a light.
The unit will automatically shut off power sequentially after a designated number of hours, determined by the on and off delay setting. This mode works well anywhere on a gig, in the studio or retail store, to automatically power down gear at the end of the day.
No more bending over — turning on all your equipment has never been easier! Just tap your toe on the footswitch and you watch your gear come to life in the proper sequence everytime.
Intertek Listed to UL Standard UL1449-3, the ROCKN STOMPN power strip protects your gear with 1935 joules of surge suppression.
When you buy a ROCKN STOMPN power strip, you are buying the last power strip you'll ever need. Each and every ROCKN STOMPN power strip comes with a lifetime warranty!
The ROCKN STOMPN's U.S.A. manufactured EMI/RFI filtering components provides your valuable electronic equipment with clean, noise-free AC power to your gear, perfect for your studio or live performances.
Automatic extreme over voltage protection with automatic resettable circuitry — ensuring your equipment will work better and longer.
I have the unique privilege of getting a chance to play through a ton of great gear, and the Rockn Stompn RS-4 Sequential Power Strip is one of the BEST innovations I've come across. For starters it's built like a tank, and the convenience of hitting one footswitch and having the RS-4 power down connected devices sequentially is 100% awesome. I've been using it non-stop since I plugged it in the first time and there's no going back.
The Rockn Stompn Sequential Power Strip provides an automated solution for a problem most people have just accepted as a part of playing amplified music. With the added benefit of protection and sound conditioning it is a convenience that is hard to imagine living without once you’ve been spoiled enough to have experienced.
The Rockn Stompn RS-4 is a new foot-activated sequential power strip designed for musicians. Turned on or off with a footswitch, the RS-4 has eight power outlets grouped into four receptacles that are set to a delay in order to power your gear up in the right order.
You might be wondering why on earth I’m posting about a Power Strip but this has been specifically engineered for musicians because it allows you to sequentially power up and down various parts of your rig.
AC power sequencers are commonplace in pro recording studios and post-production houses for turning on/off many racks of super-expensive audio, video and computer workstations in a certain order with time delays between certain pieces of gear to prevent possible damage to loudspeakers and other gear. The Rockn Stompn RS-4 brings that technology in an easy to setup and use power strip for the itinerant musician or project studio.
I would definitely save up to get one of these units. Not only does it give me clean power, but the surge protection is worth it as well. Protecting my gear is ultra-important to me, and for as much as I gig year round, having that protection gives me a lot of peace of mind. Plus, once you have everything hooked up, all you need to do is hit the foot switch, and your rig will power on – in the right sequence. The foot switch is VERY convenient.
Amazon.comBuy Now »
Grand Praire, TXBuy Now »
Nashville, TNView details »
Spartanburg, TNView details »
Atlanta, GAView details »
Louisville, KYView details »
Monterey , CAView details »
|Power Rating||120VAC, 60Hz, 15A 1800W|
|Safety Agency Approvals||ETL Listed file 4007270 in US and Canada conforms to ANSI/ UL Std. UL 1449-3 UL 1363 and certified to CAN/CSA 22.2 NO. 8|
|Actuation Switch||Push button foot switch (on- off)|
|Dimensions||13.25”L X 4.25”W X 1.50”H|
|Chassis Construction||Stainless Steel Welded 20 guage|
|Receptacles||(8) High impact thermoplastic (4) duplex receptacle Nema 5-15R|
|Power Rating||120VAC, 60Hz, 15A 1800W|
|Power Cord||15 foot 14 gauge SJT Nema 5-15p|
|Surge Suppression||(9) MOV’s 1935 Joules L-N L-G N-G Network UL1449-3|
|Circuit Protection||15 AMP main power circuit breaker extreme over voltages over current shutdown with automatic resettable circuit|
|EMI/EMC||Electromagnetic Interference (EMI) Filters-Fourth Edition; General Instruction No 1, 2 and 3;Issue:1982/09/01 (CSA C22.2 No. 8, with T.I.L No 516) 55022|
|Delay Sequence||4-step 0-15 second adjustable delay sequence between receptacles for both on delay and off delay for potentially 0 to 45 second delay|
|Diagnostic Indicators||(4) LEDS one for each duplex receptacle indicating AC power to dedicated receptacle and power to controlling relay (1)LED front panel indicates electronic control module’s switching power supply and surge suppression network is functioning properly|